Troy-Bilt 13AP91KT563 Lawn Mower Manual

The Troy-Bilt 13AP91KT563 is a powerful lawn mower designed for efficient grass cutting and maintenance. It features a robust engine, adjustable cutting heights, and a user-friendly design that makes mowing your lawn easier than ever. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Mower 8. Maintenance and Care 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: Powerful engine, adjustable cutting height, ergonomic handle, and easy-start system.

FeatureDescription
EngineHigh-performance engine for efficient cutting
Cutting Height AdjustmentMultiple height settings for different grass lengths
Ergonomic HandleComfortable grip for easy maneuverability
Easy Start SystemQuick start feature for hassle-free operation
Grass BagLarge capacity bag for easy grass collection

Installation

Unpack and inspect contents. Assemble the mower according to the instructions.

  1. Attach the handle: Align and secure the handle to the mower body.
  2. Check oil levels: Ensure the engine oil is filled to the recommended level.
  3. Fill the fuel tank: Use fresh gasoline suitable for small engines.
  4. Inspect the blade: Ensure the blade is sharp and properly installed.

WARNING! Always wear safety gear when handling the mower. Ensure all parts are securely attached.

First-Time Setup

Prepare the mower for operation by following these steps.

  1. Check the oil: Ensure the oil is at the correct level before starting.
  2. Fill the fuel tank: Use the appropriate fuel for the engine.
  3. Adjust the cutting height: Set to your desired grass length.
  4. Start the mower: Follow the starting procedure outlined in the manual.

CAUTION! Ensure the area is clear of obstacles before starting the mower.

Specifications

Controls and Settings

Familiarize yourself with the mower's controls for optimal operation.

Controls: Throttle control, safety switch, and height adjustment lever.

Safety features include a blade brake and a safety key to prevent accidental starts.

Connecting Devices

Ensure all connections are secure before starting the mower.

  1. Check fuel and oil levels before operation.
  2. Ensure the grass bag is properly attached.
  3. Inspect the blade for any damage before use.

Tip: Always perform a pre-operation check to ensure safety and efficiency.

Operating the Mower

Follow these steps for safe and effective mowing.

  1. Start the mower: Follow the starting procedure outlined in the manual.
  2. Mow in straight lines for an even cut.
  3. Adjust speed as necessary for different grass conditions.
  4. Empty the grass bag regularly to maintain performance.

WARNING! Do not operate the mower on wet grass or uneven terrain.

Maintenance and Care

Regular maintenance is essential for optimal performance.

  1. Check and change the oil regularly.
  2. Sharpen the blade as needed.
  3. Clean the mower after each use to prevent grass buildup.
  4. Store in a dry place during off-season.

CAUTION! Always disconnect the spark plug before performing maintenance.

Safety Information

Read and understand all safety information before operating the mower.

Troubleshooting

SymptomPossible CauseCorrective Action
Mower won't startFuel or oil issueCheck fuel levels and oil; ensure spark plug is connected.
Uneven cutBlade height adjustmentAdjust cutting height for even grass length.
Grass bag not fillingClogged chuteClear any debris from the chute.
Excessive vibrationDull or damaged bladeSharpen or replace the blade as necessary.

Reset: Refer to the manual for reset procedures if applicable.

Service: Contact Troy-Bilt customer service for assistance.

Troy-Bilt 13AP91KT563 Lawn Mower Manual © - All Rights Reserved 2026