Troy-Bilt 13A726JD066 Lawn Mower Manual

The Troy-Bilt 13A726JD066 is a powerful lawn mower designed for efficient grass cutting and maintenance. It features a robust engine, adjustable cutting heights, and a user-friendly design for easy operation. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Mower 8. Maintenance and Care 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: Powerful engine, adjustable cutting height, ergonomic handle, and easy-start mechanism.

FeatureDescription
EngineHigh-performance engine for efficient cutting
Cutting Height AdjustmentMultiple height settings for different grass lengths
Ergonomic HandleComfortable grip for extended use
Easy StartQuick-start mechanism for hassle-free operation
Grass BagLarge capacity for easy grass collection

Installation

Unpack and inspect contents. Ensure all parts are included.

  1. Attach the handle: Align and secure the handle to the mower body.
  2. Check oil level: Ensure the engine oil is at the recommended level.
  3. Fill with fuel: Use fresh gasoline for optimal performance.
  4. Inspect blades: Ensure blades are sharp and free of debris.

WARNING! Always follow safety precautions when handling the mower.

First-Time Setup

Prepare the mower for operation by following these steps.

  1. Check fuel and oil levels before starting.
  2. Adjust cutting height according to your lawn's needs.
  3. Familiarize yourself with the controls and safety features.
  4. Perform a test run in a small area to ensure proper operation.

CAUTION! Always wear appropriate safety gear when operating the mower.

Specifications

Controls and Settings

Access controls easily with the ergonomic handle design. Key controls include the throttle, choke, and safety switch.

Throttle: Adjusts engine speed for optimal cutting performance.

Choke: Used for starting the engine in cold conditions.

Safety Switch: Ensures the mower does not operate when not in use.

Connecting Devices

Ensure all connections are secure before starting the mower.

  1. Check fuel and oil connections.
  2. Ensure the grass bag is properly attached.
  3. Inspect the blade for secure attachment.

Tip: Always perform a safety check before operation.

Operating the Mower

Follow these steps for safe and effective operation.

  1. Start the engine: Pull the starter cord firmly.
  2. Adjust the throttle for desired speed.
  3. Guide the mower in straight lines for even cutting.
  4. Empty the grass bag as needed for optimal performance.

WARNING! Do not operate on wet grass to avoid slipping.

Maintenance and Care

Regular maintenance is essential for optimal performance.

  1. Clean the mower after each use.
  2. Check and change the oil regularly.
  3. Sharpen blades as needed for effective cutting.
  4. Store in a dry place to prevent rust.

CAUTION! Always disconnect the spark plug before performing maintenance.

Safety Information

Read all safety instructions before operating the mower.

Troubleshooting

SymptomPossible CauseCorrective Action
Engine won't startNo fuel or oilCheck fuel and oil levels; refill if necessary.
Uneven cuttingBlades dull or unevenSharpen or replace blades as needed.
Excessive vibrationLoose partsInspect and tighten all loose components.
Grass not collectingClogged grass bagEmpty and clean the grass bag.

Reset: Refer to the manual for reset procedures if applicable.

Service: Contact Troy-Bilt customer service for assistance.

Troy-Bilt 13A726JD066 Lawn Mower Manual © - All Rights Reserved 2026